Osady lub zgorzeliny na powierzchni

Osady lub zgorzeliny na powierzchni rurek znacznie ograniczają sprawność wymiennika ciepła. Ponadto, wraz ze zwiększaniem się warstwy zgorzelin lub osadu czyszczenie rurek jest utrudnione. Dlatego wnętrze rurek należy czyścić regularnie.
Istnieje kilka metod czyszczenia rurek, takich jak czyszczenie strumieniem wody (czyszczenie niechemiczne), czyszczenie strumieniowo-ścierne i czyszczenie chemiczne.
UWAGA:
Zastosowanie nieprawidłowej metody czyszczenia może prowadzić do uszkodzenia rurek. Prosimy o kontakt z producentem urządzenia w celu ustalenia odpowiedniej metody i procedury czyszczenia.

結果 (英語) 1:

Sediment or scale on the surface of the tubing will greatly reduce the efficiency of the heat exchanger. In addition, with increasing scale layer or the sediment cleaning tube is obstructed. Therefore, the Interior of the tube should be cleaned on a regular basis.There are several methods for cleaning pipes such as water jet cleaning (non-chemical cleaning) cleaning stream-abrasive and chemical cleaning.Note:The use of improper cleaning methods can lead to damage to the tubes. Please contact the device manufacturer to determine the appropriate methods and procedures.

結果 (英語) 2:

Settlements or scale on the surface of the tubes considerably limit ± efficiency SC heat exchanger wit and. Furthermore, as the related ę zooming up ę layer of scales or solid cleaning tubes is difficult. Therefore, the interior ę floor tubes should be f s or COG those Æ regularly.
There are several methods of cleaning pipes, such as water jet cleaning (cleaning non-chemical) blast cleaning - COG friction and dry cleaning.
NOTE:
Use of incorrect wit of this method of cleaning can f s leads Æ damage to the tubes. Please contact the device manufacturer ± device to determine the appropriate methods and procedures for cleaning.

結果 (英語) 3:

sludges or scale on the surface of the tubes substantially restrict efficiency heat exchanger. furthermore, as the layer zgorzelin or sludge cleaning tubes is difficult. therefore, the tubes should be cleaned regularly.
there are several methods cleaning tubes, such as water jet cleaning (cleaning, non chemical)cleaning abrasive blasting and cleaning chemical.
note:
use incorrect cleaning methods may lead to damage to the tubes. please contact the manufacturer of equipment in order to establish an appropriate method and cleaning procedures.